Sherco 2.5 and 2.9 2T

Available in 250cc (the 2.5) and the 272cc (the 2.9) editions, Sherco's mainstay two-stroke powered competition machines have two distinct personalities. The 2.5 is smoother, softer of the bottom, while the 2.9 provides maximum power for point-and-shoot, top-level sections. The 2.5 tends to be more popular in Europe, while the 2.9 is the more common choice of US riders. A very smooth clutch is one of the stand-out attributes of the Shercos, easy engagement, and wonderful feel. The bikes are now fitted with the newest Ceriani forks, replacing the Paolis which were found on the bikes in the past.

Specifications

Engine 2T stroke Sherco proprietary design

Capacity 2.5 (249.7 c.c.) / 2.9 (272 c.c.)

Bore x Stroke 2.5 (72.8x69 mm) / 2.9 (76x60 mm)

Cylinder Nikasil coated cylinder

Lubrication Unleaded gasoline with 2% oil pre-mix

Start Geared system with folding lever

Carburetor Dellorto PHPL26

Exhaust Steel header pipe with an integrated aluminum muffler

Transmission 5 speed sequential gearbox with security selector system to prevent false shifts. Primary gear drive chain secondary drive

Clutch Hydraulically activated multidisc in oil bath

Ignition Leonelli progressive, electronic ignition with a balanªced magnetic flywheel

Skid plate Made from stamped heat treated Aluminum

Chassis Triangulated cross section Chrome-moly. Painted flat black

Fuel tank Made from nylon with a 2.9 l. capacity

Brakes Hydraulically activated AJP, floating 185 mm front and 145 mm. rear

Front suspension Ceriani 38 mm. dia hydraulic telescope fork, 185 mm travel fully adjustable for preload and dampening. Black low friction coating

Rear suspension Progressive link system with single Olle adjustable shock absorber, 175 mm travel

Front wheel Morad 21" black anodized aluminum rim and aluminum hub, steel spokes with Michelin tube-type tire

Rear Wheel Morad 18" black anodized aluminum rim and aluminum hub, steel spokes with Michelin tubeless tire

Weight 69.5 kg (153 lbs)

Wheelbase 1.322 mm (52.4 inches)

Ground clearance 305 mm (12 inches)

Seat height 625 mm (24.6 inches)

Specifications
Engine	2T stroke Sherco proprietary design
Capacity	2.5 (249.7 c.c.) / 2.9 (272 c.c.)
Bore x Stroke	2.5 (72.8x69 mm) / 2.9 (76x60 mm)
Cylinder	Nikasil coated cylinder
Lubrication	Unleaded gasoline with 2% oil pre-mix
Start	Geared system with folding lever
Carburetor	Dellorto PHPL26
Exhaust	Steel header pipe with an integrated aluminum muffler
Transmission	5 speed sequential gearbox with security selector system to prevent false shifts. Primary gear drive chain secondary drive
Clutch	Hydraulically activated multidisc in oil bath
Ignition	Leonelli progressive, electronic ignition with a balanªced magnetic flywheel
Skid plate	Made from stamped heat treated Aluminum
Chassis	Triangulated cross section Chrome-moly. Painted flat black
Fuel tank	Made from nylon with a 2.9 l. capacity
Brakes	Hydraulically activated AJP, floating 185 mm front and 145 mm. rear
Front suspension	Ceriani 38 mm. dia hydraulic telescope fork, 185 mm travel fully adjustable for preload and dampening. Black low friction coating
Rear suspension	Progressive link system with single Olle adjustable shock absorber, 175 mm travel
Front wheel	Morad 21" black anodized aluminum rim and aluminum hub, steel spokes with Michelin tube-type tire
Rear Wheel	Morad 18" black anodized aluminum rim and aluminum hub, steel spokes with Michelin tubeless tire
Weight	69.5 kg (153 lbs)
Wheelbase	1.322 mm (52.4 inches)
Ground clearance	305 mm (12 inches)
Seat height	625 mm (24.6 inches)

Document Links: